I3C 8 位元位址記憶體目標¶

PxI3C8BitAddressMemoryTarget 在 I3C 匯流排上模擬位元組定址記憶體裝置。控制器寫入 8 位元記憶體索引後，即可讀寫資料位元組，並自動遞增。

功能¶

256 位元組記憶體對應，採 8 位元索引與自動遞增。
CCC 處理，包含位址指派、MRL/MWL、GETCAPS、GETSTATUS、GETMXDS 與群組位址。
透過 CCC 啟用時支援 IBI 與 Hot-Join。
透過 memory_target_read_event 與 memory_target_write_event 提供 記憶體事件。

PxI3C8BitAddressMemoryTarget ¶

PxI3C8BitAddressMemoryTarget(
    exerciser: AqProtocolExerciser,
    *args,
    pid: int | None = None,
    bcr: int = 0,
    dcr: int = 0,
    config: PxI3C8BitAddressMemoryTargetConfig | None = None,
    static_addr: int = 0,
    minimum_mrl: int | None = None,
    minimum_mwl: int | None = None,
    getcaps_std_value: bytes | None = None,
    getcaps_usr_value: list[tuple[int, bytes]] | None = None,
    getstatus_std_value: bytes | None = None,
    getstatus_usr_value: list[tuple[int, bytes]] | None = None,
    getmxds_std_value: bytes | None = None,
    getmxds_usr_value: list[tuple[int, bytes]] | None = None,
    supported_group_address_count: int = 3,
    reset_actions: int | PxI3CTargetResetAction | None = None,
    reset_pin: int | None = None,
    **kwargs
)

Bases: PxAbstractTarget[PxI3C8BitAddressMemoryTargetConfig, PxI3C8BitAddressMemoryTargetState]

I3C byte-addressable memory target.

Emulates a 256-byte memory device on an I3C bus. Controllers access memory using a 7-bit device address plus an 8-bit sub-address (memory offset), then read or write data bytes with auto-increment.

Use read_mem and write_mem to access backing store from Python. Bus reads and writes from a controller emit memory_target_read_event and memory_target_write_event notifications. The target also supports standard I3C CCC handling, IBI, and Hot-Join like other I3C targets.

CLASS	DESCRIPTION
`IbiType`	IBI type enumeration.
`HotJoinType`	Hot-Join type enumeration.

METHOD	DESCRIPTION
`add_event_handler`	Add an event handler to the current device instance, by event class or event name.
`remove_event_handler`	Remove an event handler from the current device instance, by event class or event name.
`get_event_handlers`	Retreive handlers registerd on this device.
`on_event`	Add an event handler to the instance by decorator, by event class or event name.
`match`	Return whether a device config describes a device of this class.
`update_additional_data`	Atomically update additional_data with revision-aware retry.
`update_config`	Set the config of the target.
`set_config`	Set the config of the target.
`attach_to_bus`	Attach the target to a bus.
`detach_from_bus`	Detach the device from the bus.
`perform_operation`	Send an operation.
`ibi_request`	Initiate an IBI request from the current target.
`send_hotjoin`	Initiate a Hot-Join request from the current target.
`read_mem`	Read bytes from backing store via the Protocol Exerciser API.
`write_mem`	Write bytes to backing store via the Protocol Exerciser API.

ATTRIBUTE	DESCRIPTION
`available_events_map`	Map each available event name to its id in event topics. TYPE: `dict[str, str]`
`is_attached`	Check if the device is attached to a bus. TYPE: `bool`
`state`	Get the state of the device. TYPE: `DeviceStateT \| None`
`name`	Get the name of the device. TYPE: `str`
`cts_op_name`	Get the name of CTS operation. Currently not available now. TYPE: `str \| None`
`additional_data`	Get the opaque additional data blob associated with this device. TYPE: `bytes`
`config`	Get the config of the device. TYPE: `DeviceConfigT \| None`
`static_address`	Static address of the I3C memory target. TYPE: `int`
`assigned_address`	Get the assigned address of the target. TYPE: `int`
`event_state`	Get the event state of the target. TYPE: `int`
`group_addresses`	Get the group addresses assigned to the target. TYPE: `list[int]`
`mrl`	Get the maximum read length of the target. TYPE: `int`
`mwl`	Get the maximum write length of the target. TYPE: `int`

available_events_map ¶

available_events_map: dict[str, str]

Map each available event name to its id in event topics.

is_attached ¶

is_attached: bool

Check if the device is attached to a bus.

state ¶

state: DeviceStateT | None

Get the state of the device.

name ¶

name: str

Get the name of the device.

cts_op_name ¶

cts_op_name: str | None

Get the name of CTS operation. Currently not available now.

additional_data ¶

additional_data: bytes

Get the opaque additional data blob associated with this device.

config ¶

config: DeviceConfigT | None

Get the config of the device.

static_address ¶

static_address: int

Static address of the I3C memory target.

assigned_address ¶

assigned_address: int

Get the assigned address of the target.

event_state ¶

event_state: int

Get the event state of the target.

group_addresses ¶

group_addresses: list[int]

Get the group addresses assigned to the target.

mrl ¶

mrl: int

Get the maximum read length of the target.

mwl ¶

mwl: int

Get the maximum write length of the target.

IbiType ¶

Bases: IntEnum

IBI type enumeration.

HotJoinType ¶

Bases: IntEnum

Hot-Join type enumeration.

add_event_handler ¶

add_event_handler(event: str, handler: Callable[[Any], Any]) -> None

add_event_handler(event: type[EventT], handler: Callable[[EventT], Any]) -> None

add_event_handler(
    event: str | type[PxAbstractEvent], handler: Callable[[Any], Any]
) -> None

Add an event handler to the current device instance, by event class or event name.

remove_event_handler ¶

remove_event_handler(
    event: str | type[PxAbstractEvent], handler: Callable[[Any], Any] | None = None
) -> None

Remove an event handler from the current device instance, by event class or event name.

get_event_handlers ¶

get_event_handlers(
    filter_by: Callable[[str], bool] | None = None,
) -> dict[str, list[Callable[[Any], Any]]]

Retreive handlers registerd on this device.

Handlers are always scoped to this device; an optional filter_by is applied on friendly event names.

on_event ¶

on_event(event_type: str) -> Callable[[Callable[..., Any]], Callable[..., Any]]

on_event(
    event_type: type[EventT],
) -> Callable[[Callable[[EventT], Any]], Callable[[EventT], Any]]

on_event(
    event_type: str | type[PxAbstractEvent],
) -> Callable[[Callable[..., Any]], Callable[..., Any]]

Add an event handler to the instance by decorator, by event class or event name.

match ¶

match(config: PxAbstractDeviceConfig) -> bool

Return whether a device config describes a device of this class.

update_additional_data ¶

update_additional_data(updater: Callable[[bytes], bytes]) -> None

Atomically update additional_data with revision-aware retry.

update_config ¶

update_config(updater: Callable[[Any], Any]) -> None

Set the config of the target.

set_config ¶

set_config(config: DeviceConfigT) -> None

Set the config of the target.

attach_to_bus ¶

attach_to_bus(bus: PxAbstractBus) -> None

Attach the target to a bus.

This method is used to make the device aware of the bus it is connected to. It is used to set the bus attribute of the device.

Note

This method will not automatically create an actual instance on the Protocol Exerciser until user call the attach_to_bus method.

PARAMETER	DESCRIPTION
`bus` ¶	The bus to attach the device to TYPE: `PxAbstractBus`

RAISES	DESCRIPTION
`ValueError`	If the device is already attached to a bus

detach_from_bus ¶

detach_from_bus() -> None

Detach the device from the bus.

The opposite of the attach_to_bus method.

perform_operation ¶

perform_operation(
    operation: PxDeviceOperation, *, timeout: int | None = None
) -> PxDeviceOperation

Send an operation.

PARAMETER	DESCRIPTION
`operation` ¶	Device operation to perform. TYPE: `PxDeviceOperation`
`timeout` ¶	Optional base STOP-handshake wait in milliseconds. When omitted, the instrument uses subsystem defaults. TYPE: `int \| None` DEFAULT: `None`

ibi_request ¶

ibi_request(
    ibi_type: IbiType = IMMEDIATE,
    mdb_value: bytes = b"",
    additional_data: bytes = b"",
    skip_bcr_check: bool = False,
) -> None

Initiate an IBI request from the current target.

send_hotjoin ¶

send_hotjoin(hotjoin_type: HotJoinType = IMMEDIATE) -> None

Initiate a Hot-Join request from the current target.

read_mem ¶

read_mem(addr: int, count: int) -> list[int]

Read bytes from backing store via the Protocol Exerciser API.

write_mem ¶

write_mem(addr: int, data: list[int]) -> None

Write bytes to backing store via the Protocol Exerciser API.

I3C 8 位元位址記憶體目標¶

功能¶

PxI3C8BitAddressMemoryTarget ¶

available_events_map ¶

is_attached ¶

state ¶

name ¶

cts_op_name ¶

additional_data ¶

config ¶

static_address ¶

assigned_address ¶

event_state ¶

group_addresses ¶

mrl ¶

mwl ¶

IbiType ¶

HotJoinType ¶

add_event_handler ¶

remove_event_handler ¶

get_event_handlers ¶

on_event ¶

match ¶

update_additional_data ¶

update_config ¶

set_config ¶

attach_to_bus ¶

`bus` ¶

detach_from_bus ¶

perform_operation ¶

`operation` ¶

`timeout` ¶

ibi_request ¶

send_hotjoin ¶

read_mem ¶

write_mem ¶

I3C 8 位元位址記憶體目標¶

功能¶

PxI3C8BitAddressMemoryTarget ¶

available_events_map ¶

is_attached ¶

state ¶

name ¶

cts_op_name ¶

additional_data ¶

config ¶

static_address ¶

assigned_address ¶

event_state ¶

group_addresses ¶

mrl ¶

mwl ¶

IbiType ¶

HotJoinType ¶

add_event_handler ¶

remove_event_handler ¶

get_event_handlers ¶

on_event ¶

match ¶

update_additional_data ¶

update_config ¶

set_config ¶

attach_to_bus ¶

bus ¶

detach_from_bus ¶

perform_operation ¶

operation ¶

timeout ¶

ibi_request ¶

send_hotjoin ¶

read_mem ¶

write_mem ¶

`bus` ¶

`operation` ¶

`timeout` ¶